If you are having issues with your PS3 like corrupt data, start up screen missing ( you only see the background), or when the PS3 tried to correct issues and otherwise failed, you may be able to correct them using the Playstation 3 safe mode menu. It’s a menu you may not have even known about but it’s a pretty useful tool that could end up making your PS3 problems go away. You can follow the steps below or watch the video above from Playstation support.
* Please note: Safe Mode is only available to PS3’s with system software 2.60 or greater installed. *
* Warning: Some of the options in the safe mode menu will erase all of your data including saves*
How To Start Up in Safe Mode:
- If the System is not already off, Turn off the PlayStation 3 by holding the Power button on the front of the unit till the Power light is red.
- Touch and hold the Power button (do not remove your finger from the button). You will hear the first beep, meaning the PlayStation 3 is powering on.
- Continue to hold the Power button and after about 5 seconds, you will hear a second beep, indicating the video reset.
- Continue to hold the Power button and after about another 5 seconds you will hear a third beep and the system will power off (Power light is red).
- Touch and hold the Power button (again, do not remove your finger from the button). You will hear the first beep, again for the PlayStation 3 to power on.
- Continue to hold the Power button and after about 5 seconds, you will hear a second beep for video reset.
- Continue to hold the Power button and after about another 5 seconds you will hear a quick double beep. At that point release the Power button. If you succeeded in activating Safe Mode, you will see a message on the screen saying, “Connect the controller using a USB cable and then press the PS button.”
Leave a Reply