If you’re trying to install the mighty Windows XP onto your machine and you keep getting a blue screen with an error message on it, then we might just have the fix for you.
This blue screen error message usually occurs just after the Windows XP setup process finishes loading up and says “Starting Windows”. If your PC utilizes SATA drives then what’s most likely causing the problem is a compatibility issue which can be remedied with a simple setting change in your PC’s BIOS.
- Boot up your machine and immediately enter the BIOS. This is usually done by pressing a specific key just as your machine turns on (i.e. F2 or DEL).
- Once in the BIOS Locate your configuration settings for your SATA (Serial ATA) connections.
- Switch the option for all applicable drives (usually requires all of them) to IDE or “Compatibility” Mode. These are usually set to “AHCI” by default.
- Reboot and attempt to run the install again.
Hopefully, your blue screen issue will be resolved! If not, you may have other hardware issues preventing the installation from continuing but most likely the issue is with your SATA drives.
Leave a Reply